Archivo:Floyd rose pro parts.jpg

Contenido de la página no disponible en otros idiomas.
De Wikilibros, la colección de libros de texto de contenido libre.

Floyd_rose_pro_parts.jpg ‎(585 × 445 píxeles; tamaño de archivo: 84 kB; tipo MIME: image/jpeg)


Wikimedia Commons Logo Este archivo es de Wikimedia Commons y puede usarse en otros proyectos. La descripción en su página de descripción del archivo se muestra debajo.

Resumen

Floyd Rose Pro (disassembled, parts numbered)
Source: Floyd Rose Guitars
According to Adam Reiver from Floyd Rose Guitars that I've contacted, these images are public domain. This is a modified version of original image: I've added hint lines and black numbers to add description in an article.

Public domain Yo, el titular de los derechos de autor de esta obra, lo libero al dominio público. Esto aplica en todo el mundo.
En algunos países esto puede no ser legalmente factible; si ello ocurriese:
Concedo a cualquier persona el derecho de usar este trabajo para cualquier propósito, sin ningún tipo de condición al menos que éstas sean requeridas por la ley.

Licencia

Esta obra tiene derechos de autor. El dueño de los derechos autoriza su utilización sin restricciones, incluyendo todo tipo de redistribución, modificaciones y uso comercial.

Nota: Si es obra tuya, considera usar en su lugar {{PD-self}} .

Description of figure

English:
  1. Saddle — A metal box the string is locked into. There is one saddle for each string, hence six for the standard 6-string guitars, and seven for 7-string guitars. Each saddle contains a long screw that fixes the string holder block inside it. An Allen wrench is required to loosen or tighten these.
  2. String Holder Block or Saddle Block — A cube-shaped metal block that presses the string end into the saddle wall thus locking it tight.
  3. Intonation Screws — Screws that hold saddles on the base plate; when loose, the saddles can be moved forward and backward, effectively changing intonation of a string. An Allen wrench is required to loosen or tighten these.
  4. Fine Tuners — Screws that are used to fine-tune strings instead of the machine heads which cannot be used after the nut has locked the strings at the neck. It can be rotated with bare hands.
  5. Vibrato/Tremolo Arm — The most visible part of mechanism, a handle that can be used to change played notes pitch up and down during play.
  6. Nut — A string clamp, installed as the "zero fret" at the neck. It has screws and braces called "locks" to clamp on the strings that run through it. An Allen wrench is required to loosen or tighten the nut.
  7. String Retainer — A metal bar installed at headstock to retain strings that go to the machine heads.
  8. Springs — Springs that pull the bridge downward around the pivot point, balancing the string tension. They are installed into a cavity that is usually accessible from behind the guitar body and is hidden under plastic cover. There are usually 3 springs. However, to change the resistance of arm to more comfortable one, some guitarists may use anything from 1 to 5 springs.
  9. Spring Claw Hook — A connector between the guitar body and springs. It has special "claws" to attach the springs to. This part is usually mounted to the guitar body using long screws that can be adjusted to change the tension of springs and thus re-balance the whole tremolo system.
  10. Allen wrenches — Three sizes are usually supplied with the tremolo. The smallest is used for intonation screws; the mid-sized wrench is used for fixing screws on saddle blocks and the largest is for nut screws. Floyd Rose Licensed systems usually supplies and uses only two sizes of wrenches as their variation uses the same size for the screws on the saddle blocks and nut. However, on some models only need the first two, as the bridge and nut screws are the same size.

Leyendas

Añade una explicación corta acerca de lo que representa este archivo

Elementos representados en este archivo

representa a

Historial del archivo

Haz clic sobre una fecha y hora para ver el archivo tal como apareció en ese momento.

Fecha y horaMiniaturaDimensionesUsuarioComentario
actual17:41 10 sep 2005Miniatura de la versión del 17:41 10 sep 2005585 × 445 (84 kB)GreyCatFloyd Rose Pro (disassembled, parts numbered) Source: Floyd Rose Guitars According to Adam Reiver from Floyd Rose Guitars that I've contacted, these images are public domain. This is a modified version of original image: I've added hint lines and black nu

La siguiente página usa este archivo:

Uso global del archivo

Las wikis siguientes utilizan este archivo:

Obtenido de «https://es.wikibooks.org/wiki/Archivo:Floyd_rose_pro_parts.jpg»